1. Types Of Video Editing

Contents What you need to know. There are several dealing with capture problems. Read them all and they will help you.

Capture and Edit Options. CS4:. CS3:. If you are using anything other than a standard OHCI compliant capture card, be sure to check the manufacturer's knowledgebase for known problems, updates and driver downloads.

You must be logged in as an administrator the first time you perform a capture so that certain privileged Registry entries can be created. If you're still having a problem, create a new user account with adminstrator priveleges. Restart the computer and log in as the new user and try capturing. For best results, be sure your camcorder is set to two-channel mode, 16bit, 48KHz and that you set the date and time before doing any shooting.

Types Of Video Editing

Be sure not to leave gaps on a tape between shoots. Non-contiguous timecode, especially gaps with no timecode at all, is only going to cause unnecessary headaches. Be sure to capture a 32KHz clip in a 32KHz project. Be sure to capture a 48KHz clip in a 48KHz project.

See the following:. in the Premiere Pro CS4 Help.

in the Premiere Pro CS3 Help. The section “ Avoiding DV capture problems” in the Premiere Pro Help.

Some DV devices require you to enable the IEEE 1394 interface. See the user manual for details. Some DV devices are switchable between PAL/NTSC.

Ensure the switch is set to the same format used on the tape. See the user manual for details. You may also need to play a bit of the tape before connecting the device to the computer to ensure the correct signal is used. The HDR-FX1 must have 'iLink conversion to DV' set to off, otherwise Windows sees it as a DV device instead of a HDV device. See the user manual for details. Be sure to disconnect your device from the computer when switching it between DV and HDV.

The computer can only detect the device type at connection time. If you installed any “codec packs” you have caused yourself a lot of headaches. You can try uninstalling the codec packs, but you may well end up having to re-install Windows from scratch. The “Tsunami” codec pack has been specifically reported as causing capture problems. Some people with dual processors are reporting capture problems in version 1.5, see the thread '.

The solution is to reduce affinity to a single processor in the Windows Task Manager, or install the latest AMD Dual Core Processor driver and the MS Hotfix for XPSP2: KBB896256. reported solving capture preview problems by switching playback settings from. said:1. Don't run other media apps while opening Premiere Pro.

I found that playing music in Winamp stopped Premiere from opening.2. Disable as many processes as you can. See all those little icons in the bottom right of your screen? Shut them down. I found that 3 of those (Including Google Desktop Search, Microsoft Antipsyware) caused startup and capture issues with Premiere Pro.3.

Remove any codec packages you might have installed. These can cause startup issues with Premiere Pro. said:I think I have found the culprit. I have two RAID arrays in my system, on MOBO VIA and the other an SI 3112 (PCI add-in).When I switched to capturing on my other RAID array (the VIA), the artifacts stopped. I believe now it is my Work drive array controlled by the SI 3112 that is causing the issue.now the work really begins.

Defragment all of your hard drives at least once a week. Search the Internet for a utility to monitor your CPU temperature.